Do you have a solid teak dining table or just bought a used teak table? But they are not well burnished, have scratches, and look pale or getting old, right? So you need to refinish it. But don’t know how to refinish teak dining tables in effective ways?

Everything in this world gets old after using it for a long time. Teak wood tables or furniture are no exception. Certainly, it is compulsory to scour the table. Today, I am going to share with you some of the methods that will make your dying teak table look captivating like a new one.

After many years of use, the dining table is stained, dusty, and pale in appearance. The dining table, however, plays a vital role to make your dining room plummy. The best and easiest way to restore danish teak furniture or teak furniture using a natural oil or murphy’s oil soap. To know more about this, read this article from beginning to end.

12 Fruitful DIY Steps To Refinish Teak Dining Table That Really Works:

Teak wood furniture is very durable and looks more gorgeous than mahogany or other woods. But needless to say, they also have deterioration. So in this case, repairing or restoring them is obligatory.

In this article, I break down all the information about how to refinish the teak dining tables to turn back the shine. So follow this stepwise guide to restore your favorite table.

Step 1: Take Off The Table And Keep It Under Sun

The first and foremost duty of refinishing indoor teak furniture or dining table is to leave the table under the sun’s heat. It’s very effective for getting soft and easy to clean. Moreover, sun rays help to eliminate tiny dirt and make them separate from the table.

By doing this, you can clean your table properly and make the table cleanable. Also, it helps you to identify the right scratch or affected area. So you can easily identify the area and your work will be easier. I recommend you keep the table under sunlight for about 20 to 30 minutes for better results.

Step 2: Clean Properly

After heating the table for a while, however, clean the whole surface of the table. Take a good look at where the dirt and dust exist and remove them properly. In some tables or teakwood furniture, there is some extra hardware. You need to pull them out to reduce the risk of injury. Hardware may disturb during work. Sometimes, it can cause great damage.

While wiping the corners of the table, it was noticed that the hand could be cut off or severely injured due to sticking to the hardware.  Therefore, It is better to remove them to get rid of this problem. Here you can use dirt or dust removal chemicals, some water with liquid soap, a spray bottle, or a brush.

Step 3: Choose Larger Area Or Room

If you don’t have fun working, that work is not done skillfully.  When will you have fun at work now? The prerequisite of having fun is that you have to choose a place that is spacious. This will allow you to move the table from side to side. Moreover, you can save yourself from various serious losses or injuries. In this case, you can choose your backyard or large room.

Step 4: Identify The Affected Area

So cleaning and choosing a spacious area is done. Now, you need to check where the scratch or stain exists. Find out the affected area genuinely. Most of the time it is seen that when the furniture gets old, there are many stains and spots.it makes the table dull and filthy looking.

As the beauty of the table is ruined, it becomes useless. In this case, it would be wise to re-varnish the entire table. It also looks beautiful and can be stored for a long time. So make sure you identify the affected surface to get the job done accurately.

Step 5: Apply Paint Stripper

After identifying the affected area, spread the stripper well on the top of the table. Stripping teak furniture allows you to get better restoring. Although the stripper may not be able to remove the stains completely, it does help to remove the stains as much as possible.

In many cases, it is also able to remove the entire stain. Before you begin this step, make sure you have everything you need. In this case, hand gloves, protective gloves, mask, stripper, scraper, brush, and decoration tray are useful. How to do it is described step by step:

•  First, pour a certain amount of paint stripper on a certain place on the table.
• Then with the painting brush, spread the stripper evenly over the whole part of the table.
• Once you saturate whole areas, wait for 5 to 15 minutes for better results.
• Once the stripper has dried well or when clumpy, remove them with a sharp paint scraper or utility knife. In this case, it is better to start from one side of the table.
• Take them in a tray or spread polythene on the bottom so that no residue remains. Pour some mineral spirits to remove the rest (if any).
• Keep this process running a few times. I recommend continuing this process until it looks fine and the old finish vanishes thoroughly. It may be 3 times or more.

Step 6: Apply Strip Neutralizing Agent

Use some mineral spirits and wipe the spirits or methylated spirits with coarse wire wool. It helps to see how it looks after applying the chemical strip. Also, it suggests how much time you need to apply a stripper on the table. Make sure you are stripping on the border or corner of the table. Further, you can use lacquer thinner to take off the leftover stickiness.

Step 7: Use Sandpaper

To make the best finish for the teak dining table, apply sanding. It is possibly the best way to restore teak dining tables or furniture. It plays a crucial role to remove the residue and the roughness. To complete this step, you will need the following accessories: a cube or rectangular sanding block, 120-240 grit sandpaper, mask, hand gloves, and protective goggles.

However, for the convenience of rubbing the sandpaper, wrap it with a cube sanding block. It will be convenient to rub. In this case, it is better to use 120 to 240 grit sandpaper. Begin with low grit sandpaper and then use high-grade sandpaper for a perfect finish. Make sure you apply the sandpaper smoothly so that your table is scratch-free.

Or, you can use a large scraper if you want to remove the entire varnish. Rubbing with sandpaper also makes the teak wood soft and ready to perfect finish. After scraping or sanding, wet the top down with mineral spirit. By doing this, you understand how it looks and what residue is left.

Step 8: Use Danish Teak Oil

The essential equipment you need is a mask, coarse wire wool, and hand gloves. Applying danish teak oil for restoring your old exterior or interior furniture is an incredibly better choice. It is the best way to turn back the perfect color (rich golden honey color) and replace lost oil as well. Teak oil protects wood from all kinds of harmful dust and sand while increasing glaze.

Further, it prevents early drying, warping, and splitting. Also, the most important thing is that it is suitable for all types of wood. It will give your furniture a natural look, which is really captivating. It also protects the wood from various insect attacks. Most importantly, it resists water to make the table long-lasting.

In the case of different woods, teak oil exhibits different colors. Therefore, it is better to apply it elsewhere before applying it on the main dining table. The tremendous benefit is that this oil has no side effects. It is made with linseed, rosewood, and other natural ingredients. But you need to make sure that the oil you are using must be natural. Rusting and Barrettine are the best danish teak oil for indoor furniture.

Step 9: Use Wax To Polish

Sanding, chemical stripping, and using Danish Teak oil give a nice finish. But you want to make it look brighter. In this case, you can use solid wax oil. It is quite natural without any side effects. It has fast drying ability, ease of application, excellent finish, and long-lasting ability.

As a result, you don’t need to refinish frequently. To apply wax oil, you need to have pure cotton cloth, white spirit, gloves, and hard wax oil. First, you need to dilute the oil. After that, the cloth should be folded to make a palm-sized pad and dipped into the oil. Then, when the oil gets into the cloth, you have to lift it and start applying it from one side of the table.

Make sure you apply it thoroughly across the table. Finally, you will notice that the table is absorbing oil very quickly and changing its color. Once the finish is applied, the glaze may not come off as much. So if you apply it 2-3 times, it will give great and effective results.

Step 10: Remove The Pale Edge

After all, you may notice stains or dents on the table or in your garden furniture. In this case, you can put the hard tape on the scratch or dent and leave it for a while. Or, you can melt the hard wax and put it in the hole. Keep it for a while until the wax gets hard. Then pull out the extra part with a knife or small scraper. Or, you can use sandpaper here. But remember don’t rub the place too hard.

Step 11: Use Oxalic Acid

Making the rough area more glazing apply or put the oxalic acid. You can mix some water with acid so that the activity can’t harm the wood. Take one part of acid and mix it with 6 parts of warm water. Now, spray the mixture over the scratch or stains with a sprayer or brush. Then, rub the dent or rough area with a scrubbing brush.

Step 12: Apply Final Finisher

Now, you have reached the very last stage of your refinishing work. The last thing you need to do is apply a clear satin white bond oil polyurethane. Before that, moisten the upper part with some amount of alcohol.  Be sure to wear hand gloves.

However, now take some polyurethane into a pot or cup and an old cotton rag. After that, fold the cotton cloth and soak it with polyurethane oil. Wipe the surface and apply a thin coat. Continue this process until it looks excellent.

Should You Refinish And Restore Teak Outdoor And Indoor Furniture?- 4 Reasons

Refinishing and restoring your old or mid-century or G-plan teak indoor or outdoor tables add a new dimension to your home. Undoubtedly, a dining table or furniture plays an excellent role in beautifying your home. That’s why it is mandatory to restore G-plan teak furniture. Here’re the benefits:

1. Increase Shine

Needless to say, there is no debate that wooden furniture enhances the beauty of the house or the exterior space. The more beautiful the furniture, the more beautiful your house will be. In this case, it is useful to take care of them and renew them every few days.

This increases its durability as well as its beauty.  And if these are beautiful, your home automatically will be beautiful. Therefore, if your furniture gets old, refinish it as soon as possible. So it can be said that it plays an important role in enhancing beauty.

2. Extend Lifespan

No matter how expensive your furniture is, one day it’s varnish will go up and it looks annoying. Or, it often has a lot of pale spots that look ugly. And if you don’t restore them properly, they will be useless someday. In this case, if they can be restored, their lifespan will be multiplied.

3. Protect From Deterioration

 If furniture made of wood is restored, it will not only enhance the beauty but also protect it from rapid decay. So, my advice is to apply all of the above methods to quickly restore and protect your favorite furniture from early damage.

4. Save Money

Prices of teak wood furniture are usually a little higher than other wood. And so, making new furniture every now and then is time-consuming and expensive. In this case, refinishing would be better. In this case, it will save you both money and time. That being said, restoring your mid-century teak wood furniture would be a wise choice.

What Should You Consider Before Refinishing Your Solid Teak Table?

Before making any type of work done perfectly, you should consider some things. To do so, you can work safely and hassle-free. There are lots of significant considerations before refinishing or restoring your old furniture.

• Collect Important Materials

Keeping the right hardware and raw materials is mandatory. When you refinish your furniture, you have to use chemicals. These chemicals are harmful and injurious to your health. When you work with oxalic acids or chemical paint strippers, you need to wear a mask and hand gloves.

Don’t forget to wear goggles to protect your eyes. When you melt the hard wax, you need to heat. To prevent any fatal injury, you need to keep all the required materials to endure optimum safety.

• Choose Spacious Place

Working in a spacious or larger space keeps you away from any damage. Larger space means comfortability when working. You can move your table here and there easily. For this, you can complete your entire work faster and hassle-free. So make sure you have a spacious place to work.

• Focus On Safety

Safety for both you and your table is crucial. If you ruin your table instead of repairing it, it can cause great damage afterward. It is not a good thing to use water repellents on teak wood furniture. So apply such chemicals and substances that are suitable with teak. Otherwise, it will cause great damage.

Frequently Asked Questions (FAQs):

What Are The Needed Accessories Of Refinishing Teak Dining Table?

To complete the refinishing process, you should have the following raw materials to ensure safety.

• Gloves

• Mask

• Goggles or protective eye-glasses

• 120 grit sandpaper and 180 to 320 grit foam-backed sandpaper

• Chemical stripper

• Methylated spirits

• Mineral spirits

• Ending block (cube or rectangle shape)

• Painting brush

• Decorators tray

• Scrubbing brush

• Paint scraper or utility knife

• Oxalic acid

• Pure cotton cloth

• Vinegar

• Cotton pad or small sponge

• Hard wax oil

• Wool type cloth

Can You Paint Or Stain Teak Furniture?

The simple and common answer is yes. You can go for painting or staining instead of refinishing. But there is no reliable alternative for finishing or restoring. Painting is an easy and time-consuming solution rather than refining. In the wood, you can varnish, paint, and polish.

To make the wood more appealing and captivating, you can paint. But painting is not durable compared to refinishing. However, using paint or natural oil is ok. It prevents harmful elements and dust to protect the furniture for a long time.

Final Touch

The traditional refinishing process is to apply chemical strippers and sanding perfectly. It’s very annoying to see dark and blotchiness on your most usable table, isn’t it?

In this regard, you have to refinish your old or bad table. Easily renew your teak dining table using the above methods on how to refinish teak dining tables. These steps will help you to amplify the glaze and keep the table shiny. I recommend you try these methods and renew your teak dining table or furniture.